REBAR (CUT AND BEND)

Cross-sectional area and nominal mass per meter of steel bars

cross-sectional-area

Cross sectional area of given number of bars in mm2

Cross-sectional-area-of-given-number-of-bars-in-mm2

Mass per sq meter for various bar spacings (kg): Spacing of bars in millimeters

mass-per-sq-meter-for-various-bar-spacings-kg

Mass of groups of bars in kg/m

mass-of-groups-of-bars-in-kgm

Sectional areas per meter width for various spacing bars alternating (mm2): Spacing of bars in millimeters

Sectional-areas-per-meter-width-for-various-spacing-bars

Sectional areas per meter width various bar spacings (mm2): Spacing of bars in millimeters

Sectional-areas-per-meter-width-various-bar-spacings

SHAPES CODES

(Reference: BS8666:2005, dimensions and scheduling of steel reinforcement for concrete)

shapes-code

MINIMUM HOOK, BEND AND RADIUS ALLOWANCE

Effective anchor length

L-Bars

Effective-anchor-length

MESH REINFORCING

Effective anchor length

Quality Control

Reinforcing mesh is produced to highest quality standards and complies with BS 4483 . Thorough testing of wire strength, welds and aperture sizes is continuously performed at all stages of the manufacturing process. Final inspections ensure that highest standards are maintained.

Standard Sizes

Reinforcing mesh is available in rolls (60m x 2,4m) and sheets (6m x 2,4m), manufactured according to standard sizes. Wire diameters vary from 3,55mm to 12mm. Mesh aperture can be as small as 100mm x 100mm. However Kosto Ltd (Mauritius) trades only with A142 (6mm), A252 (8mm) and A393 (10mm) complying with BS 4483:1985 as local requirements.

mesh-reinforcing